AMI Firmware Update Utility 2.34

AMI Firmware Update Utility(ATPIO) v2.34
Copyright (C)2009 American Megatrends Inc. All Rights Reserved.

Usage: AFUDOS <ROM File Name> [Option 1] [Option 2]...
or
AFUDOS <Input or Output File Name> <Command>
or
AFUDOS <Command>

Commands:
/O - Save current BIOS into file
/U - Display ROM file's ROMID
/S - Refer to Options: /S
/D - Verification test of given ROM File without flashing BIOS.

Options:
/P - Program main BIOS image
/B - Program Boot Block
/N - Program NVRAM
/E - Program Embedded Controller Block
/K - Program all non-critical blocks and ROM Holes
/Kn - Program n'th non-critical block or ROM Hole only(n=0-7)
/Q - Silent execution
/REBOOT - Reboot after programming
/X - Don't Check ROM ID
/S - Display current system's ROMID
/R - Preserve ALL SMBIOS structure during NVRAM programming
/Rn - Preserve SMBIOS type N during programming(n=0-255)
/ECUF - Update EC BIOS when newer version is detected.
/SHUTDOWN - Shutdown after programming.
/HOLE: - Update specific ROM Hole according to RomHole GUID. NewRomHole1.BIN /HOLE:RomH1
/HOLEOUT: - Save specific ROM Hole according to given GUID. NewRomHole1.BIN /HOLEOUT:RomH1
/SP - Preserve Setup setting.
/EC - Program Embedded Controller Block. (Flash Type)
/MEUF - Program ME Ignition Firmware Block.
/ME - Program ME Entire Firmware Block.
/CAF - Compare ROM file's data with Systems is different or not, if not then cancel related update.