AMI Firmware Update Utility v4.31

AMI Firmware Update Utility Ver.4.31
Copyright (C)2009 American Megatrends Inc. All Rights Reserved.

Usage: AFUDOS <ROM File Name> [Option 1] [Option 2]...
or
AFUDOS <Input or Output File Name> <Command>
or
AFUDOS <Command>

Commands:
/O - Save current BIOS into file
/C - Refer to Options: /C
/U - Display ROM file's ROMID
/S - Refer to Options: /S
/Ln - Refer to Options: /Ln
/M - Refer to Options: /M
/MAI - Disaply System ROM and ROM file's MA information
/HOLE: - Update specific ROM Hole according to given name. NewRomHole1.BIN /HOLE:RomH1
/HOLEOUT: - Save specific ROM Hole according to given name. NewRomHole1.BIN /HOLEOUT:RomH1
/NCB: Update specific Non-Critical Block according to given name. NewNcb1.BIN /NCB:Ncb1
/NCBOUT: Save specific Non-Critical Block according to given name. NewNcb1.BIN /NCBOUT:Ncb1
/D - Verification test of given ROM File without flashing BIOS.
/CLNEVNLOG - Refer to Options: /CLNEVNLOG

Options:
/P - Program main BIOS image
/B - Program Boot Block
/N - Program NVRAM
/C - Destroy CMOS checksum
/E - Program Embedded Controller Block
/K - Program all non-critical blocks
/Kn - Program n'th non-critical block only(n=0-7)
/Q - Silent execution
/REBOOT - Reboot after programming
/X - Don't Check ROM ID
/S - Display current system's ROMID
/Ln - Load CMOS defaults:(n=0-3)
L0: Load current optimal
L1: Load current failsafe
L2: Load optimal from ROM file
L3: Load failsafe from ROM file
/M - Update bootblock MAC address if it exists, Example: /M1234ABCD will update MAC to 1234ABCD
/R - Preserve ALL SMBIOS structure during NVRAM programming
/Rn - Preserve SMBIOS type N during NVRAM programming(n=0-255), Example: Use /R0 / R11 will preserve type 0 and 11 if they exist.
/ECUF - Update EC BIOS when newer version is detected.
/SHUTDOWN - Shutdown after programming.
/EC - Program Embedded Controller Block. (Flash Type)
/CLNEVNLOG - Clear Event Log.
/MEUF - Program ME Ignition Firmware Block.
/ME - Program ME Entire Firmware Block.