AMI Firmware Update Utility Ver.4.04

AMI Firmware Update Utility Ver.4.04
Copyright (C)2006 American Megatrends Inc. All Rights Reserved.

Usage: AFUDOS <ROM File Name> [Option 1] [Option 2]...
or
AFUDOS <ROM File Name> <Command>
or
AFUDOS /M<Mac Address>
-----------------------------------------------------------------------
Commands:
/O - Save current BIOS into file
/U - Display ROM file's ROMID

Options:
/P - Program main BIOS image
/B - Program Boot Block
/N - Program NVRAM
/C - Destroy CMOS checksum
/E - Program Embedded Controller Block
/K - Program all non-critical blocks
/Kn - Program n'th non-critical block only(n=0-7)
/Q - Silent execution
/REBOOT - Reboot after programming
/X - Don't Check ROM ID
/S - Display current system's ROMID
/Ln - Load CMOS defaults:(n=0-3)
L0: Load current optimal
L1: Load current failsafe
L2: Load optimal from ROM file
L3: Load failsafe from ROM file
/M - Update bootblock MAC address if it exists
Example: /M1234ABCD will update MAC to 1234ABCD
/R - Preserve ALL SMBIOS structure during NVRAM programming
/Rn - Preserve SMBIOS type N during NVRAM programming(n=0-255)
Example: Use '/R0 /R11' will preserve type 0 and 11 if they exist.